M115 × 6 Metric Thread Dimensions
Nominal diameter 115 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 111.103 mm. Basic minor diameter: 108.505 mm. Basic major diameter: 115 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 111.103 | 111.353 |
| Minor | 108.505 | 109.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.08 | Not specified |
| Pitch | 111.183 | 111.498 |
| Minor | 108.585 | 109.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 111.103 | 111.418 |
| Minor | 108.505 | 109.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.08 | Not specified |
| Pitch | 111.183 | 111.583 |
| Minor | 108.585 | 109.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 111.103 | 111.503 |
| Minor | 108.505 | 109.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.08 | Not specified |
| Pitch | 111.183 | 111.683 |
| Minor | 108.585 | 109.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 111.103 | 111.603 |
| Minor | 108.505 | 109.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.08 | Not specified |
| Pitch | 111.183 | 111.813 |
| Minor | 108.585 | 109.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 111.103 | 111.733 |
| Minor | 108.505 | 109.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.32 | 114.92 |
| Pitch | 110.723 | 111.023 |
| Root d3 | 107.027 | 107.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.32 | 114.92 |
| Pitch | 110.833 | 111.023 |
| Root d3 | 107.137 | 107.559 |
Cutting tap preparation
Pre-drill recommendation: 109 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 112.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.