M115 × 3 Metric Thread Dimensions
Nominal diameter 115 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 113.051 mm. Basic minor diameter: 111.752 mm. Basic major diameter: 115 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.051 | 113.241 |
| Minor | 111.752 | 112.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.048 | Not specified |
| Pitch | 113.099 | 113.335 |
| Minor | 111.8 | 112.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.051 | 113.287 |
| Minor | 111.752 | 112.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.048 | Not specified |
| Pitch | 113.099 | 113.399 |
| Minor | 111.8 | 112.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.051 | 113.351 |
| Minor | 111.752 | 112.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.048 | Not specified |
| Pitch | 113.099 | 113.474 |
| Minor | 111.8 | 112.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.051 | 113.426 |
| Minor | 111.752 | 112.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.048 | Not specified |
| Pitch | 113.099 | 113.574 |
| Minor | 111.8 | 112.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.051 | 113.526 |
| Minor | 111.752 | 112.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.577 | 114.952 |
| Pitch | 112.779 | 113.003 |
| Root d3 | 110.931 | 111.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.577 | 114.952 |
| Pitch | 112.863 | 113.003 |
| Root d3 | 111.015 | 111.271 |
Cutting tap preparation
Pre-drill recommendation: 112 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 113.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.