M115 × 1.5 Metric Thread Dimensions
Nominal diameter 115 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 114.026 mm. Basic minor diameter: 113.376 mm. Basic major diameter: 115 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 114.026 | 114.166 |
| Minor | 113.376 | 113.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.032 | Not specified |
| Pitch | 114.058 | 114.238 |
| Minor | 113.408 | 113.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 114.026 | 114.206 |
| Minor | 113.376 | 113.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.032 | Not specified |
| Pitch | 114.058 | 114.282 |
| Minor | 113.408 | 113.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 114.026 | 114.25 |
| Minor | 113.376 | 113.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.032 | Not specified |
| Pitch | 114.058 | 114.338 |
| Minor | 113.408 | 113.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 114.026 | 114.306 |
| Minor | 113.376 | 113.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.032 | Not specified |
| Pitch | 114.058 | 114.413 |
| Minor | 113.408 | 113.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 114.026 | 114.381 |
| Minor | 113.376 | 113.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.732 | 114.968 |
| Pitch | 113.824 | 113.994 |
| Root d3 | 112.9 | 113.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.732 | 114.968 |
| Pitch | 113.888 | 113.994 |
| Root d3 | 112.964 | 113.128 |
Cutting tap preparation
Pre-drill recommendation: 113.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 114.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.