M115 × 4 Metric Thread Dimensions
Nominal diameter 115 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 112.402 mm. Basic minor diameter: 110.67 mm. Basic major diameter: 115 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 112.402 | 112.614 |
| Minor | 110.67 | 111.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.06 | Not specified |
| Pitch | 112.462 | 112.727 |
| Minor | 110.73 | 111.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 112.402 | 112.667 |
| Minor | 110.67 | 111.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.06 | Not specified |
| Pitch | 112.462 | 112.797 |
| Minor | 110.73 | 111.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 112.402 | 112.737 |
| Minor | 110.67 | 111.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.06 | Not specified |
| Pitch | 112.462 | 112.887 |
| Minor | 110.73 | 111.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 112.402 | 112.827 |
| Minor | 110.67 | 111.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.06 | Not specified |
| Pitch | 112.462 | 112.992 |
| Minor | 110.73 | 111.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 112.402 | 112.932 |
| Minor | 110.67 | 111.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.465 | 114.94 |
| Pitch | 112.092 | 112.342 |
| Root d3 | 109.628 | 110.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.465 | 114.94 |
| Pitch | 112.182 | 112.342 |
| Root d3 | 109.718 | 110.033 |
Cutting tap preparation
Pre-drill recommendation: 111 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 113.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.