M115 × 2 Metric Thread Dimensions
Nominal diameter 115 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 113.701 mm. Basic minor diameter: 112.835 mm. Basic major diameter: 115 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.701 | 113.861 |
| Minor | 112.835 | 113.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.038 | Not specified |
| Pitch | 113.739 | 113.939 |
| Minor | 112.873 | 113.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.701 | 113.901 |
| Minor | 112.835 | 113.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.038 | Not specified |
| Pitch | 113.739 | 113.989 |
| Minor | 112.873 | 113.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.701 | 113.951 |
| Minor | 112.835 | 113.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.038 | Not specified |
| Pitch | 113.739 | 114.054 |
| Minor | 112.873 | 113.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.701 | 114.016 |
| Minor | 112.835 | 113.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115.038 | Not specified |
| Pitch | 113.739 | 114.139 |
| Minor | 112.873 | 113.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 115 | Not specified |
| Pitch | 113.701 | 114.101 |
| Minor | 112.835 | 113.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.682 | 114.962 |
| Pitch | 113.473 | 113.663 |
| Root d3 | 112.241 | 112.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 114.682 | 114.962 |
| Pitch | 113.545 | 113.663 |
| Root d3 | 112.313 | 112.508 |
Cutting tap preparation
Pre-drill recommendation: 113 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 114.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.