M10 × 1.25 Metric Thread Dimensions
Nominal diameter 10 mm; pitch 1.25 mm.
Basic geometry
Basic pitch diameter: 9.188 mm. Basic minor diameter: 8.647 mm. Basic major diameter: 10 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.188 | 9.288 |
| Minor | 8.647 | 8.817 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.216 | 9.341 |
| Minor | 8.675 | 8.887 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.188 | 9.313 |
| Minor | 8.647 | 8.859 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.216 | 9.376 |
| Minor | 8.675 | 8.94 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.188 | 9.348 |
| Minor | 8.647 | 8.912 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.216 | 9.416 |
| Minor | 8.675 | 9.01 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.188 | 9.388 |
| Minor | 8.647 | 8.982 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.216 | 9.466 |
| Minor | 8.675 | 9.1 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.188 | 9.438 |
| Minor | 8.647 | 9.072 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.76 | 9.972 |
| Pitch | 9.042 | 9.16 |
| Root d3 | 8.272 | 8.438 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.76 | 9.972 |
| Pitch | 9.085 | 9.16 |
| Root d3 | 8.315 | 8.438 |
Cutting tap preparation
Pre-drill recommendation: 8.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 9.45 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.