M10 × 1.12 Metric Thread Dimensions
Nominal diameter 10 mm; pitch 1.12 mm.
Basic geometry
Basic pitch diameter: 9.273 mm. Basic minor diameter: 8.788 mm. Basic major diameter: 10 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.273 | 9.373 |
| Minor | 8.788 | 8.948 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.301 | 9.426 |
| Minor | 8.816 | 9.016 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.273 | 9.398 |
| Minor | 8.788 | 8.988 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.301 | 9.461 |
| Minor | 8.816 | 9.066 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.273 | 9.433 |
| Minor | 8.788 | 9.038 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.301 | 9.501 |
| Minor | 8.816 | 9.131 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.273 | 9.473 |
| Minor | 8.788 | 9.103 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.028 | Not specified |
| Pitch | 9.301 | 9.551 |
| Minor | 8.816 | 9.216 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.273 | 9.523 |
| Minor | 8.788 | 9.188 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.782 | 9.972 |
| Pitch | 9.127 | 9.245 |
| Root d3 | 8.437 | 8.598 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.782 | 9.972 |
| Pitch | 9.17 | 9.245 |
| Root d3 | 8.48 | 8.598 |
Cutting tap preparation
Pre-drill recommendation: 8.88 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 9.5 mm. Approximate formation model. Estimated formation: 65.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.