M10 × 0.5 Metric Thread Dimensions
Nominal diameter 10 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 9.675 mm. Basic minor diameter: 9.459 mm. Basic major diameter: 10 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.675 | 9.746 |
| Minor | 9.459 | 9.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.02 | Not specified |
| Pitch | 9.695 | 9.785 |
| Minor | 9.479 | 9.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.675 | 9.765 |
| Minor | 9.459 | 9.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.02 | Not specified |
| Pitch | 9.695 | 9.807 |
| Minor | 9.479 | 9.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.675 | 9.787 |
| Minor | 9.459 | 9.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.874 | 9.98 |
| Pitch | 9.57 | 9.655 |
| Root d3 | 9.262 | 9.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.874 | 9.98 |
| Pitch | 9.602 | 9.655 |
| Root d3 | 9.294 | 9.367 |
Cutting tap preparation
Pre-drill recommendation: 9.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 9.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.