M10 × 1 Metric Thread Dimensions
Nominal diameter 10 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 9.35 mm. Basic minor diameter: 8.917 mm. Basic major diameter: 10 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.35 | 9.445 |
| Minor | 8.917 | 9.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.026 | Not specified |
| Pitch | 9.376 | 9.494 |
| Minor | 8.943 | 9.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.35 | 9.468 |
| Minor | 8.917 | 9.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.026 | Not specified |
| Pitch | 9.376 | 9.526 |
| Minor | 8.943 | 9.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.35 | 9.5 |
| Minor | 8.917 | 9.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.026 | Not specified |
| Pitch | 9.376 | 9.566 |
| Minor | 8.943 | 9.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.35 | 9.54 |
| Minor | 8.917 | 9.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.026 | Not specified |
| Pitch | 9.376 | 9.612 |
| Minor | 8.943 | 9.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.35 | 9.586 |
| Minor | 8.917 | 9.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.794 | 9.974 |
| Pitch | 9.212 | 9.324 |
| Root d3 | 8.596 | 8.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.794 | 9.974 |
| Pitch | 9.253 | 9.324 |
| Root d3 | 8.637 | 8.747 |
Cutting tap preparation
Pre-drill recommendation: 9 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 9.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.