M10 × 0.75 Metric Thread Dimensions
Nominal diameter 10 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 9.513 mm. Basic minor diameter: 9.188 mm. Basic major diameter: 10 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.513 | 9.598 |
| Minor | 9.188 | 9.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.022 | Not specified |
| Pitch | 9.535 | 9.641 |
| Minor | 9.21 | 9.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.513 | 9.619 |
| Minor | 9.188 | 9.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.022 | Not specified |
| Pitch | 9.535 | 9.667 |
| Minor | 9.21 | 9.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.513 | 9.645 |
| Minor | 9.188 | 9.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.022 | Not specified |
| Pitch | 9.535 | 9.705 |
| Minor | 9.21 | 9.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10 | Not specified |
| Pitch | 9.513 | 9.683 |
| Minor | 9.188 | 9.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.838 | 9.978 |
| Pitch | 9.391 | 9.491 |
| Root d3 | 8.929 | 9.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 9.838 | 9.978 |
| Pitch | 9.428 | 9.491 |
| Root d3 | 8.966 | 9.058 |
Cutting tap preparation
Pre-drill recommendation: 9.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 9.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.