M100 × 6 Metric Thread Dimensions
Nominal diameter 100 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 96.103 mm. Basic minor diameter: 93.505 mm. Basic major diameter: 100 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 96.103 | 96.353 |
| Minor | 93.505 | 94.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.08 | Not specified |
| Pitch | 96.183 | 96.498 |
| Minor | 93.585 | 94.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 96.103 | 96.418 |
| Minor | 93.505 | 94.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.08 | Not specified |
| Pitch | 96.183 | 96.583 |
| Minor | 93.585 | 94.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 96.103 | 96.503 |
| Minor | 93.505 | 94.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.08 | Not specified |
| Pitch | 96.183 | 96.683 |
| Minor | 93.585 | 94.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 96.103 | 96.603 |
| Minor | 93.505 | 94.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.08 | Not specified |
| Pitch | 96.183 | 96.813 |
| Minor | 93.585 | 94.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 96.103 | 96.733 |
| Minor | 93.505 | 94.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.32 | 99.92 |
| Pitch | 95.723 | 96.023 |
| Root d3 | 92.027 | 92.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.32 | 99.92 |
| Pitch | 95.833 | 96.023 |
| Root d3 | 92.137 | 92.559 |
Cutting tap preparation
Pre-drill recommendation: 94 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 97.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.