M100 × 1.5 Metric Thread Dimensions
Nominal diameter 100 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 99.026 mm. Basic minor diameter: 98.376 mm. Basic major diameter: 100 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 99.026 | 99.166 |
| Minor | 98.376 | 98.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.032 | Not specified |
| Pitch | 99.058 | 99.238 |
| Minor | 98.408 | 98.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 99.026 | 99.206 |
| Minor | 98.376 | 98.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.032 | Not specified |
| Pitch | 99.058 | 99.282 |
| Minor | 98.408 | 98.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 99.026 | 99.25 |
| Minor | 98.376 | 98.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.032 | Not specified |
| Pitch | 99.058 | 99.338 |
| Minor | 98.408 | 98.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 99.026 | 99.306 |
| Minor | 98.376 | 98.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.032 | Not specified |
| Pitch | 99.058 | 99.413 |
| Minor | 98.408 | 98.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 99.026 | 99.381 |
| Minor | 98.376 | 98.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.732 | 99.968 |
| Pitch | 98.824 | 98.994 |
| Root d3 | 97.9 | 98.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.732 | 99.968 |
| Pitch | 98.888 | 98.994 |
| Root d3 | 97.964 | 98.128 |
Cutting tap preparation
Pre-drill recommendation: 98.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 99.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.