M100 × 3 Metric Thread Dimensions
Nominal diameter 100 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 98.051 mm. Basic minor diameter: 96.752 mm. Basic major diameter: 100 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.051 | 98.241 |
| Minor | 96.752 | 97.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.048 | Not specified |
| Pitch | 98.099 | 98.335 |
| Minor | 96.8 | 97.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.051 | 98.287 |
| Minor | 96.752 | 97.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.048 | Not specified |
| Pitch | 98.099 | 98.399 |
| Minor | 96.8 | 97.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.051 | 98.351 |
| Minor | 96.752 | 97.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.048 | Not specified |
| Pitch | 98.099 | 98.474 |
| Minor | 96.8 | 97.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.051 | 98.426 |
| Minor | 96.752 | 97.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.048 | Not specified |
| Pitch | 98.099 | 98.574 |
| Minor | 96.8 | 97.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.051 | 98.526 |
| Minor | 96.752 | 97.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.577 | 99.952 |
| Pitch | 97.779 | 98.003 |
| Root d3 | 95.931 | 96.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.577 | 99.952 |
| Pitch | 97.863 | 98.003 |
| Root d3 | 96.015 | 96.271 |
Cutting tap preparation
Pre-drill recommendation: 97 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 98.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.