M100 × 4 Metric Thread Dimensions
Nominal diameter 100 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 97.402 mm. Basic minor diameter: 95.67 mm. Basic major diameter: 100 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 97.402 | 97.614 |
| Minor | 95.67 | 96.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.06 | Not specified |
| Pitch | 97.462 | 97.727 |
| Minor | 95.73 | 96.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 97.402 | 97.667 |
| Minor | 95.67 | 96.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.06 | Not specified |
| Pitch | 97.462 | 97.797 |
| Minor | 95.73 | 96.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 97.402 | 97.737 |
| Minor | 95.67 | 96.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.06 | Not specified |
| Pitch | 97.462 | 97.887 |
| Minor | 95.73 | 96.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 97.402 | 97.827 |
| Minor | 95.67 | 96.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.06 | Not specified |
| Pitch | 97.462 | 97.992 |
| Minor | 95.73 | 96.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 97.402 | 97.932 |
| Minor | 95.67 | 96.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.465 | 99.94 |
| Pitch | 97.092 | 97.342 |
| Root d3 | 94.628 | 95.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.465 | 99.94 |
| Pitch | 97.182 | 97.342 |
| Root d3 | 94.718 | 95.033 |
Cutting tap preparation
Pre-drill recommendation: 96 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 98.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.