M100 × 2 Metric Thread Dimensions
Nominal diameter 100 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 98.701 mm. Basic minor diameter: 97.835 mm. Basic major diameter: 100 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.701 | 98.861 |
| Minor | 97.835 | 98.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.038 | Not specified |
| Pitch | 98.739 | 98.939 |
| Minor | 97.873 | 98.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.701 | 98.901 |
| Minor | 97.835 | 98.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.038 | Not specified |
| Pitch | 98.739 | 98.989 |
| Minor | 97.873 | 98.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.701 | 98.951 |
| Minor | 97.835 | 98.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.038 | Not specified |
| Pitch | 98.739 | 99.054 |
| Minor | 97.873 | 98.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.701 | 99.016 |
| Minor | 97.835 | 98.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100.038 | Not specified |
| Pitch | 98.739 | 99.139 |
| Minor | 97.873 | 98.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 100 | Not specified |
| Pitch | 98.701 | 99.101 |
| Minor | 97.835 | 98.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.682 | 99.962 |
| Pitch | 98.473 | 98.663 |
| Root d3 | 97.241 | 97.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 99.682 | 99.962 |
| Pitch | 98.545 | 98.663 |
| Root d3 | 97.313 | 97.508 |
Cutting tap preparation
Pre-drill recommendation: 98 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 99.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.