M90 × 6 Metric Thread Dimensions
Nominal diameter 90 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 86.103 mm. Basic minor diameter: 83.505 mm. Basic major diameter: 90 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 86.103 | 86.339 |
| Minor | 83.505 | 84.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.08 | Not specified |
| Pitch | 86.183 | 86.483 |
| Minor | 83.585 | 84.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 86.103 | 86.403 |
| Minor | 83.505 | 84.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.08 | Not specified |
| Pitch | 86.183 | 86.558 |
| Minor | 83.585 | 84.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 86.103 | 86.478 |
| Minor | 83.505 | 84.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.08 | Not specified |
| Pitch | 86.183 | 86.658 |
| Minor | 83.585 | 84.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 86.103 | 86.578 |
| Minor | 83.505 | 84.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.08 | Not specified |
| Pitch | 86.183 | 86.783 |
| Minor | 83.585 | 84.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 86.103 | 86.703 |
| Minor | 83.505 | 84.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.32 | 89.92 |
| Pitch | 85.743 | 86.023 |
| Root d3 | 82.047 | 82.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.32 | 89.92 |
| Pitch | 85.843 | 86.023 |
| Root d3 | 82.147 | 82.559 |
Cutting tap preparation
Pre-drill recommendation: 84 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 87.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.