M90 × 4 Metric Thread Dimensions
Nominal diameter 90 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 87.402 mm. Basic minor diameter: 85.67 mm. Basic major diameter: 90 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 87.402 | 87.602 |
| Minor | 85.67 | 86.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.06 | Not specified |
| Pitch | 87.462 | 87.712 |
| Minor | 85.73 | 86.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 87.402 | 87.652 |
| Minor | 85.67 | 86.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.06 | Not specified |
| Pitch | 87.462 | 87.777 |
| Minor | 85.73 | 86.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 87.402 | 87.717 |
| Minor | 85.67 | 86.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.06 | Not specified |
| Pitch | 87.462 | 87.862 |
| Minor | 85.73 | 86.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 87.402 | 87.802 |
| Minor | 85.67 | 86.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.06 | Not specified |
| Pitch | 87.462 | 87.962 |
| Minor | 85.73 | 86.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 87.402 | 87.902 |
| Minor | 85.67 | 86.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.465 | 89.94 |
| Pitch | 87.106 | 87.342 |
| Root d3 | 84.642 | 85.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.465 | 89.94 |
| Pitch | 87.192 | 87.342 |
| Root d3 | 84.728 | 85.033 |
Cutting tap preparation
Pre-drill recommendation: 86 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 88.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.