M90 × 3 Metric Thread Dimensions
Nominal diameter 90 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 88.051 mm. Basic minor diameter: 86.752 mm. Basic major diameter: 90 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.051 | 88.231 |
| Minor | 86.752 | 87.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.048 | Not specified |
| Pitch | 88.099 | 88.323 |
| Minor | 86.8 | 87.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.051 | 88.275 |
| Minor | 86.752 | 87.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.048 | Not specified |
| Pitch | 88.099 | 88.379 |
| Minor | 86.8 | 87.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.051 | 88.331 |
| Minor | 86.752 | 87.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.048 | Not specified |
| Pitch | 88.099 | 88.454 |
| Minor | 86.8 | 87.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.051 | 88.406 |
| Minor | 86.752 | 87.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.048 | Not specified |
| Pitch | 88.099 | 88.549 |
| Minor | 86.8 | 87.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.051 | 88.501 |
| Minor | 86.752 | 87.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.577 | 89.952 |
| Pitch | 87.791 | 88.003 |
| Root d3 | 85.943 | 86.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.577 | 89.952 |
| Pitch | 87.871 | 88.003 |
| Root d3 | 86.023 | 86.271 |
Cutting tap preparation
Pre-drill recommendation: 87 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 88.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.