M90 × 2 Metric Thread Dimensions
Nominal diameter 90 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 88.701 mm. Basic minor diameter: 87.835 mm. Basic major diameter: 90 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.701 | 88.851 |
| Minor | 87.835 | 88.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.038 | Not specified |
| Pitch | 88.739 | 88.929 |
| Minor | 87.873 | 88.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.701 | 88.891 |
| Minor | 87.835 | 88.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.038 | Not specified |
| Pitch | 88.739 | 88.975 |
| Minor | 87.873 | 88.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.701 | 88.937 |
| Minor | 87.835 | 88.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.038 | Not specified |
| Pitch | 88.739 | 89.039 |
| Minor | 87.873 | 88.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.701 | 89.001 |
| Minor | 87.835 | 88.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90.038 | Not specified |
| Pitch | 88.739 | 89.114 |
| Minor | 87.873 | 88.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 90 | Not specified |
| Pitch | 88.701 | 89.076 |
| Minor | 87.835 | 88.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.682 | 89.962 |
| Pitch | 88.483 | 88.663 |
| Root d3 | 87.251 | 87.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 89.682 | 89.962 |
| Pitch | 88.551 | 88.663 |
| Root d3 | 87.319 | 87.508 |
Cutting tap preparation
Pre-drill recommendation: 88 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 89.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.