M85 × 6 Metric Thread Dimensions
Nominal diameter 85 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 81.103 mm. Basic minor diameter: 78.505 mm. Basic major diameter: 85 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 81.103 | 81.339 |
| Minor | 78.505 | 79.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.08 | Not specified |
| Pitch | 81.183 | 81.483 |
| Minor | 78.585 | 79.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 81.103 | 81.403 |
| Minor | 78.505 | 79.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.08 | Not specified |
| Pitch | 81.183 | 81.558 |
| Minor | 78.585 | 79.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 81.103 | 81.478 |
| Minor | 78.505 | 79.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.08 | Not specified |
| Pitch | 81.183 | 81.658 |
| Minor | 78.585 | 79.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 81.103 | 81.578 |
| Minor | 78.505 | 79.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.08 | Not specified |
| Pitch | 81.183 | 81.783 |
| Minor | 78.585 | 79.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 81.103 | 81.703 |
| Minor | 78.505 | 79.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.32 | 84.92 |
| Pitch | 80.743 | 81.023 |
| Root d3 | 77.047 | 77.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.32 | 84.92 |
| Pitch | 80.843 | 81.023 |
| Root d3 | 77.147 | 77.559 |
Cutting tap preparation
Pre-drill recommendation: 79 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 82.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.