M85 × 2 Metric Thread Dimensions
Nominal diameter 85 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 83.701 mm. Basic minor diameter: 82.835 mm. Basic major diameter: 85 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.701 | 83.851 |
| Minor | 82.835 | 83.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.038 | Not specified |
| Pitch | 83.739 | 83.929 |
| Minor | 82.873 | 83.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.701 | 83.891 |
| Minor | 82.835 | 83.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.038 | Not specified |
| Pitch | 83.739 | 83.975 |
| Minor | 82.873 | 83.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.701 | 83.937 |
| Minor | 82.835 | 83.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.038 | Not specified |
| Pitch | 83.739 | 84.039 |
| Minor | 82.873 | 83.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.701 | 84.001 |
| Minor | 82.835 | 83.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.038 | Not specified |
| Pitch | 83.739 | 84.114 |
| Minor | 82.873 | 83.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.701 | 84.076 |
| Minor | 82.835 | 83.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.682 | 84.962 |
| Pitch | 83.483 | 83.663 |
| Root d3 | 82.251 | 82.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.682 | 84.962 |
| Pitch | 83.551 | 83.663 |
| Root d3 | 82.319 | 82.508 |
Cutting tap preparation
Pre-drill recommendation: 83 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 84.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.