M85 × 3 Metric Thread Dimensions
Nominal diameter 85 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 83.051 mm. Basic minor diameter: 81.752 mm. Basic major diameter: 85 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.051 | 83.231 |
| Minor | 81.752 | 82.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.048 | Not specified |
| Pitch | 83.099 | 83.323 |
| Minor | 81.8 | 82.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.051 | 83.275 |
| Minor | 81.752 | 82.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.048 | Not specified |
| Pitch | 83.099 | 83.379 |
| Minor | 81.8 | 82.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.051 | 83.331 |
| Minor | 81.752 | 82.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.048 | Not specified |
| Pitch | 83.099 | 83.454 |
| Minor | 81.8 | 82.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.051 | 83.406 |
| Minor | 81.752 | 82.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.048 | Not specified |
| Pitch | 83.099 | 83.549 |
| Minor | 81.8 | 82.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 83.051 | 83.501 |
| Minor | 81.752 | 82.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.577 | 84.952 |
| Pitch | 82.791 | 83.003 |
| Root d3 | 80.943 | 81.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.577 | 84.952 |
| Pitch | 82.871 | 83.003 |
| Root d3 | 81.023 | 81.271 |
Cutting tap preparation
Pre-drill recommendation: 82 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 83.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.