M85 × 1.5 Metric Thread Dimensions
Nominal diameter 85 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 84.026 mm. Basic minor diameter: 83.376 mm. Basic major diameter: 85 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 84.026 | 84.158 |
| Minor | 83.376 | 83.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.032 | Not specified |
| Pitch | 84.058 | 84.228 |
| Minor | 83.408 | 83.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 84.026 | 84.196 |
| Minor | 83.376 | 83.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.032 | Not specified |
| Pitch | 84.058 | 84.27 |
| Minor | 83.408 | 83.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 84.026 | 84.238 |
| Minor | 83.376 | 83.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.032 | Not specified |
| Pitch | 84.058 | 84.323 |
| Minor | 83.408 | 83.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 84.026 | 84.291 |
| Minor | 83.376 | 83.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85.032 | Not specified |
| Pitch | 84.058 | 84.393 |
| Minor | 83.408 | 83.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 85 | Not specified |
| Pitch | 84.026 | 84.361 |
| Minor | 83.376 | 83.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.732 | 84.968 |
| Pitch | 83.834 | 83.994 |
| Root d3 | 82.91 | 83.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 84.732 | 84.968 |
| Pitch | 83.894 | 83.994 |
| Root d3 | 82.97 | 83.128 |
Cutting tap preparation
Pre-drill recommendation: 83.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 84.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.