M80 × 6 Metric Thread Dimensions
Nominal diameter 80 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 76.103 mm. Basic minor diameter: 73.505 mm. Basic major diameter: 80 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 76.103 | 76.339 |
| Minor | 73.505 | 74.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.08 | Not specified |
| Pitch | 76.183 | 76.483 |
| Minor | 73.585 | 74.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 76.103 | 76.403 |
| Minor | 73.505 | 74.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.08 | Not specified |
| Pitch | 76.183 | 76.558 |
| Minor | 73.585 | 74.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 76.103 | 76.478 |
| Minor | 73.505 | 74.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.08 | Not specified |
| Pitch | 76.183 | 76.658 |
| Minor | 73.585 | 74.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 76.103 | 76.578 |
| Minor | 73.505 | 74.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.08 | Not specified |
| Pitch | 76.183 | 76.783 |
| Minor | 73.585 | 74.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 76.103 | 76.703 |
| Minor | 73.505 | 74.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.32 | 79.92 |
| Pitch | 75.743 | 76.023 |
| Root d3 | 72.047 | 72.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.32 | 79.92 |
| Pitch | 75.843 | 76.023 |
| Root d3 | 72.147 | 72.559 |
Cutting tap preparation
Pre-drill recommendation: 74 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 77.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.