M80 × 3 Metric Thread Dimensions
Nominal diameter 80 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 78.051 mm. Basic minor diameter: 76.752 mm. Basic major diameter: 80 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.051 | 78.231 |
| Minor | 76.752 | 77.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.048 | Not specified |
| Pitch | 78.099 | 78.323 |
| Minor | 76.8 | 77.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.051 | 78.275 |
| Minor | 76.752 | 77.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.048 | Not specified |
| Pitch | 78.099 | 78.379 |
| Minor | 76.8 | 77.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.051 | 78.331 |
| Minor | 76.752 | 77.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.048 | Not specified |
| Pitch | 78.099 | 78.454 |
| Minor | 76.8 | 77.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.051 | 78.406 |
| Minor | 76.752 | 77.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.048 | Not specified |
| Pitch | 78.099 | 78.549 |
| Minor | 76.8 | 77.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.051 | 78.501 |
| Minor | 76.752 | 77.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.577 | 79.952 |
| Pitch | 77.791 | 78.003 |
| Root d3 | 75.943 | 76.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.577 | 79.952 |
| Pitch | 77.871 | 78.003 |
| Root d3 | 76.023 | 76.271 |
Cutting tap preparation
Pre-drill recommendation: 77 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 78.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.