M80 × 2 Metric Thread Dimensions
Nominal diameter 80 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 78.701 mm. Basic minor diameter: 77.835 mm. Basic major diameter: 80 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.701 | 78.851 |
| Minor | 77.835 | 78.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.038 | Not specified |
| Pitch | 78.739 | 78.929 |
| Minor | 77.873 | 78.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.701 | 78.891 |
| Minor | 77.835 | 78.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.038 | Not specified |
| Pitch | 78.739 | 78.975 |
| Minor | 77.873 | 78.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.701 | 78.937 |
| Minor | 77.835 | 78.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.038 | Not specified |
| Pitch | 78.739 | 79.039 |
| Minor | 77.873 | 78.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.701 | 79.001 |
| Minor | 77.835 | 78.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.038 | Not specified |
| Pitch | 78.739 | 79.114 |
| Minor | 77.873 | 78.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 78.701 | 79.076 |
| Minor | 77.835 | 78.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.682 | 79.962 |
| Pitch | 78.483 | 78.663 |
| Root d3 | 77.251 | 77.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.682 | 79.962 |
| Pitch | 78.551 | 78.663 |
| Root d3 | 77.319 | 77.508 |
Cutting tap preparation
Pre-drill recommendation: 78 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 79.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.