M80 × 1 Metric Thread Dimensions
Nominal diameter 80 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 79.35 mm. Basic minor diameter: 78.917 mm. Basic major diameter: 80 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 79.35 | 79.468 |
| Minor | 78.917 | 79.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.026 | Not specified |
| Pitch | 79.376 | 79.526 |
| Minor | 78.943 | 79.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 79.35 | 79.5 |
| Minor | 78.917 | 79.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.026 | Not specified |
| Pitch | 79.376 | 79.556 |
| Minor | 78.943 | 79.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 79.35 | 79.53 |
| Minor | 78.917 | 79.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80.026 | Not specified |
| Pitch | 79.376 | 79.612 |
| Minor | 78.943 | 79.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 80 | Not specified |
| Pitch | 79.35 | 79.586 |
| Minor | 78.917 | 79.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.794 | 79.974 |
| Pitch | 79.184 | 79.324 |
| Root d3 | 78.568 | 78.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 79.794 | 79.974 |
| Pitch | 79.234 | 79.324 |
| Root d3 | 78.618 | 78.747 |
Cutting tap preparation
Pre-drill recommendation: 79 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 79.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.