M78 × 2 Metric Thread Dimensions
Nominal diameter 78 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 76.701 mm. Basic minor diameter: 75.835 mm. Basic major diameter: 78 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78 | Not specified |
| Pitch | 76.701 | 76.851 |
| Minor | 75.835 | 76.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78.038 | Not specified |
| Pitch | 76.739 | 76.929 |
| Minor | 75.873 | 76.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78 | Not specified |
| Pitch | 76.701 | 76.891 |
| Minor | 75.835 | 76.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78.038 | Not specified |
| Pitch | 76.739 | 76.975 |
| Minor | 75.873 | 76.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78 | Not specified |
| Pitch | 76.701 | 76.937 |
| Minor | 75.835 | 76.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78.038 | Not specified |
| Pitch | 76.739 | 77.039 |
| Minor | 75.873 | 76.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78 | Not specified |
| Pitch | 76.701 | 77.001 |
| Minor | 75.835 | 76.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78.038 | Not specified |
| Pitch | 76.739 | 77.114 |
| Minor | 75.873 | 76.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 78 | Not specified |
| Pitch | 76.701 | 77.076 |
| Minor | 75.835 | 76.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 77.682 | 77.962 |
| Pitch | 76.483 | 76.663 |
| Root d3 | 75.251 | 75.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 77.682 | 77.962 |
| Pitch | 76.551 | 76.663 |
| Root d3 | 75.319 | 75.508 |
Cutting tap preparation
Pre-drill recommendation: 76 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 77.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.