M68 × 6 Metric Thread Dimensions
Nominal diameter 68 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 64.103 mm. Basic minor diameter: 61.505 mm. Basic major diameter: 68 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 64.103 | 64.339 |
| Minor | 61.505 | 62.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.08 | Not specified |
| Pitch | 64.183 | 64.483 |
| Minor | 61.585 | 62.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 64.103 | 64.403 |
| Minor | 61.505 | 62.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.08 | Not specified |
| Pitch | 64.183 | 64.558 |
| Minor | 61.585 | 62.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 64.103 | 64.478 |
| Minor | 61.505 | 62.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.08 | Not specified |
| Pitch | 64.183 | 64.658 |
| Minor | 61.585 | 62.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 64.103 | 64.578 |
| Minor | 61.505 | 62.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.08 | Not specified |
| Pitch | 64.183 | 64.783 |
| Minor | 61.585 | 62.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 64.103 | 64.703 |
| Minor | 61.505 | 62.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.32 | 67.92 |
| Pitch | 63.743 | 64.023 |
| Root d3 | 60.047 | 60.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.32 | 67.92 |
| Pitch | 63.843 | 64.023 |
| Root d3 | 60.147 | 60.559 |
Cutting tap preparation
Pre-drill recommendation: 62 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 65.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.