M68 × 1 Metric Thread Dimensions
Nominal diameter 68 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 67.35 mm. Basic minor diameter: 66.917 mm. Basic major diameter: 68 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 67.35 | 67.468 |
| Minor | 66.917 | 67.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.026 | Not specified |
| Pitch | 67.376 | 67.526 |
| Minor | 66.943 | 67.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 67.35 | 67.5 |
| Minor | 66.917 | 67.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.026 | Not specified |
| Pitch | 67.376 | 67.556 |
| Minor | 66.943 | 67.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 67.35 | 67.53 |
| Minor | 66.917 | 67.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.026 | Not specified |
| Pitch | 67.376 | 67.612 |
| Minor | 66.943 | 67.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 67.35 | 67.586 |
| Minor | 66.917 | 67.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.794 | 67.974 |
| Pitch | 67.184 | 67.324 |
| Root d3 | 66.568 | 66.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.794 | 67.974 |
| Pitch | 67.234 | 67.324 |
| Root d3 | 66.618 | 66.747 |
Cutting tap preparation
Pre-drill recommendation: 67 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 67.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.