M68 × 3 Metric Thread Dimensions
Nominal diameter 68 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 66.051 mm. Basic minor diameter: 64.752 mm. Basic major diameter: 68 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.051 | 66.231 |
| Minor | 64.752 | 65.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.048 | Not specified |
| Pitch | 66.099 | 66.323 |
| Minor | 64.8 | 65.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.051 | 66.275 |
| Minor | 64.752 | 65.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.048 | Not specified |
| Pitch | 66.099 | 66.379 |
| Minor | 64.8 | 65.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.051 | 66.331 |
| Minor | 64.752 | 65.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.048 | Not specified |
| Pitch | 66.099 | 66.454 |
| Minor | 64.8 | 65.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.051 | 66.406 |
| Minor | 64.752 | 65.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.048 | Not specified |
| Pitch | 66.099 | 66.549 |
| Minor | 64.8 | 65.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.051 | 66.501 |
| Minor | 64.752 | 65.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.577 | 67.952 |
| Pitch | 65.791 | 66.003 |
| Root d3 | 63.943 | 64.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.577 | 67.952 |
| Pitch | 65.871 | 66.003 |
| Root d3 | 64.023 | 64.271 |
Cutting tap preparation
Pre-drill recommendation: 65 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 66.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.