M68 × 2 Metric Thread Dimensions
Nominal diameter 68 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 66.701 mm. Basic minor diameter: 65.835 mm. Basic major diameter: 68 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.701 | 66.851 |
| Minor | 65.835 | 66.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.038 | Not specified |
| Pitch | 66.739 | 66.929 |
| Minor | 65.873 | 66.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.701 | 66.891 |
| Minor | 65.835 | 66.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.038 | Not specified |
| Pitch | 66.739 | 66.975 |
| Minor | 65.873 | 66.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.701 | 66.937 |
| Minor | 65.835 | 66.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.038 | Not specified |
| Pitch | 66.739 | 67.039 |
| Minor | 65.873 | 66.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.701 | 67.001 |
| Minor | 65.835 | 66.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68.038 | Not specified |
| Pitch | 66.739 | 67.114 |
| Minor | 65.873 | 66.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 68 | Not specified |
| Pitch | 66.701 | 67.076 |
| Minor | 65.835 | 66.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.682 | 67.962 |
| Pitch | 66.483 | 66.663 |
| Root d3 | 65.251 | 65.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 67.682 | 67.962 |
| Pitch | 66.551 | 66.663 |
| Root d3 | 65.319 | 65.508 |
Cutting tap preparation
Pre-drill recommendation: 66 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 67.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.