M64 × 6 Metric Thread Dimensions
Nominal diameter 64 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 60.103 mm. Basic minor diameter: 57.505 mm. Basic major diameter: 64 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 60.103 | 60.339 |
| Minor | 57.505 | 58.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.08 | Not specified |
| Pitch | 60.183 | 60.483 |
| Minor | 57.585 | 58.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 60.103 | 60.403 |
| Minor | 57.505 | 58.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.08 | Not specified |
| Pitch | 60.183 | 60.558 |
| Minor | 57.585 | 58.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 60.103 | 60.478 |
| Minor | 57.505 | 58.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.08 | Not specified |
| Pitch | 60.183 | 60.658 |
| Minor | 57.585 | 58.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 60.103 | 60.578 |
| Minor | 57.505 | 58.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.08 | Not specified |
| Pitch | 60.183 | 60.783 |
| Minor | 57.585 | 58.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 60.103 | 60.703 |
| Minor | 57.505 | 58.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.32 | 63.92 |
| Pitch | 59.743 | 60.023 |
| Root d3 | 56.047 | 56.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.32 | 63.92 |
| Pitch | 59.843 | 60.023 |
| Root d3 | 56.147 | 56.559 |
Cutting tap preparation
Pre-drill recommendation: 58 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 61.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.