M64 × 1 Metric Thread Dimensions
Nominal diameter 64 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 63.35 mm. Basic minor diameter: 62.917 mm. Basic major diameter: 64 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.35 | 63.468 |
| Minor | 62.917 | 63.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.026 | Not specified |
| Pitch | 63.376 | 63.526 |
| Minor | 62.943 | 63.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.35 | 63.5 |
| Minor | 62.917 | 63.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.026 | Not specified |
| Pitch | 63.376 | 63.556 |
| Minor | 62.943 | 63.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.35 | 63.53 |
| Minor | 62.917 | 63.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.026 | Not specified |
| Pitch | 63.376 | 63.612 |
| Minor | 62.943 | 63.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.35 | 63.586 |
| Minor | 62.917 | 63.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.794 | 63.974 |
| Pitch | 63.184 | 63.324 |
| Root d3 | 62.568 | 62.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.794 | 63.974 |
| Pitch | 63.234 | 63.324 |
| Root d3 | 62.618 | 62.747 |
Cutting tap preparation
Pre-drill recommendation: 63 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 63.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.