M64 × 3 Metric Thread Dimensions
Nominal diameter 64 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 62.051 mm. Basic minor diameter: 60.752 mm. Basic major diameter: 64 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 62.051 | 62.231 |
| Minor | 60.752 | 61.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.048 | Not specified |
| Pitch | 62.099 | 62.323 |
| Minor | 60.8 | 61.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 62.051 | 62.275 |
| Minor | 60.752 | 61.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.048 | Not specified |
| Pitch | 62.099 | 62.379 |
| Minor | 60.8 | 61.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 62.051 | 62.331 |
| Minor | 60.752 | 61.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.048 | Not specified |
| Pitch | 62.099 | 62.454 |
| Minor | 60.8 | 61.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 62.051 | 62.406 |
| Minor | 60.752 | 61.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.048 | Not specified |
| Pitch | 62.099 | 62.549 |
| Minor | 60.8 | 61.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 62.051 | 62.501 |
| Minor | 60.752 | 61.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.577 | 63.952 |
| Pitch | 61.791 | 62.003 |
| Root d3 | 59.943 | 60.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.577 | 63.952 |
| Pitch | 61.871 | 62.003 |
| Root d3 | 60.023 | 60.271 |
Cutting tap preparation
Pre-drill recommendation: 61 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 62.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.