M64 × 1.5 Metric Thread Dimensions
Nominal diameter 64 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 63.026 mm. Basic minor diameter: 62.376 mm. Basic major diameter: 64 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.026 | 63.158 |
| Minor | 62.376 | 62.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.032 | Not specified |
| Pitch | 63.058 | 63.228 |
| Minor | 62.408 | 62.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.026 | 63.196 |
| Minor | 62.376 | 62.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.032 | Not specified |
| Pitch | 63.058 | 63.27 |
| Minor | 62.408 | 62.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.026 | 63.238 |
| Minor | 62.376 | 62.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.032 | Not specified |
| Pitch | 63.058 | 63.323 |
| Minor | 62.408 | 62.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.026 | 63.291 |
| Minor | 62.376 | 62.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.032 | Not specified |
| Pitch | 63.058 | 63.393 |
| Minor | 62.408 | 62.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64 | Not specified |
| Pitch | 63.026 | 63.361 |
| Minor | 62.376 | 62.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.732 | 63.968 |
| Pitch | 62.834 | 62.994 |
| Root d3 | 61.91 | 62.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 63.732 | 63.968 |
| Pitch | 62.894 | 62.994 |
| Root d3 | 61.97 | 62.128 |
Cutting tap preparation
Pre-drill recommendation: 62.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 63.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.