M56 × 5.5 Metric Thread Dimensions
Nominal diameter 56 mm; pitch 5.5 mm.
Basic geometry
Basic pitch diameter: 52.428 mm. Basic minor diameter: 50.046 mm. Basic major diameter: 56 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 52.428 | 52.652 |
| Minor | 50.046 | 50.521 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.075 | Not specified |
| Pitch | 52.503 | 52.783 |
| Minor | 50.121 | 50.721 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 52.428 | 52.708 |
| Minor | 50.046 | 50.646 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.075 | Not specified |
| Pitch | 52.503 | 52.858 |
| Minor | 50.121 | 50.871 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 52.428 | 52.783 |
| Minor | 50.046 | 50.796 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.075 | Not specified |
| Pitch | 52.503 | 52.953 |
| Minor | 50.121 | 51.071 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 52.428 | 52.878 |
| Minor | 50.046 | 50.996 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.075 | Not specified |
| Pitch | 52.503 | 53.063 |
| Minor | 50.121 | 51.301 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 52.428 | 52.988 |
| Minor | 50.046 | 51.226 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.365 | 55.925 |
| Pitch | 52.088 | 52.353 |
| Root d3 | 48.7 | 49.177 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.365 | 55.925 |
| Pitch | 52.183 | 52.353 |
| Root d3 | 48.795 | 49.177 |
Cutting tap preparation
Pre-drill recommendation: 50.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 53.5 mm. Approximate formation model. Estimated formation: 66.8%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.