M56 × 4 Metric Thread Dimensions
Nominal diameter 56 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 53.402 mm. Basic minor diameter: 51.67 mm. Basic major diameter: 56 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 53.402 | 53.602 |
| Minor | 51.67 | 52.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.06 | Not specified |
| Pitch | 53.462 | 53.712 |
| Minor | 51.73 | 52.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 53.402 | 53.652 |
| Minor | 51.67 | 52.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.06 | Not specified |
| Pitch | 53.462 | 53.777 |
| Minor | 51.73 | 52.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 53.402 | 53.717 |
| Minor | 51.67 | 52.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.06 | Not specified |
| Pitch | 53.462 | 53.862 |
| Minor | 51.73 | 52.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 53.402 | 53.802 |
| Minor | 51.67 | 52.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.06 | Not specified |
| Pitch | 53.462 | 53.962 |
| Minor | 51.73 | 52.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 53.402 | 53.902 |
| Minor | 51.67 | 52.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.465 | 55.94 |
| Pitch | 53.106 | 53.342 |
| Root d3 | 50.642 | 51.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.465 | 55.94 |
| Pitch | 53.192 | 53.342 |
| Root d3 | 50.728 | 51.033 |
Cutting tap preparation
Pre-drill recommendation: 52 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 54.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.