M56 × 2 Metric Thread Dimensions
Nominal diameter 56 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 54.701 mm. Basic minor diameter: 53.835 mm. Basic major diameter: 56 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.701 | 54.851 |
| Minor | 53.835 | 54.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.038 | Not specified |
| Pitch | 54.739 | 54.929 |
| Minor | 53.873 | 54.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.701 | 54.891 |
| Minor | 53.835 | 54.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.038 | Not specified |
| Pitch | 54.739 | 54.975 |
| Minor | 53.873 | 54.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.701 | 54.937 |
| Minor | 53.835 | 54.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.038 | Not specified |
| Pitch | 54.739 | 55.039 |
| Minor | 53.873 | 54.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.701 | 55.001 |
| Minor | 53.835 | 54.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.038 | Not specified |
| Pitch | 54.739 | 55.114 |
| Minor | 53.873 | 54.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.701 | 55.076 |
| Minor | 53.835 | 54.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.682 | 55.962 |
| Pitch | 54.483 | 54.663 |
| Root d3 | 53.251 | 53.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.682 | 55.962 |
| Pitch | 54.551 | 54.663 |
| Root d3 | 53.319 | 53.508 |
Cutting tap preparation
Pre-drill recommendation: 54 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 55.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.