M56 × 3 Metric Thread Dimensions
Nominal diameter 56 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 54.051 mm. Basic minor diameter: 52.752 mm. Basic major diameter: 56 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.051 | 54.231 |
| Minor | 52.752 | 53.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.048 | Not specified |
| Pitch | 54.099 | 54.323 |
| Minor | 52.8 | 53.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.051 | 54.275 |
| Minor | 52.752 | 53.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.048 | Not specified |
| Pitch | 54.099 | 54.379 |
| Minor | 52.8 | 53.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.051 | 54.331 |
| Minor | 52.752 | 53.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.048 | Not specified |
| Pitch | 54.099 | 54.454 |
| Minor | 52.8 | 53.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.051 | 54.406 |
| Minor | 52.752 | 53.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56.048 | Not specified |
| Pitch | 54.099 | 54.549 |
| Minor | 52.8 | 53.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 56 | Not specified |
| Pitch | 54.051 | 54.501 |
| Minor | 52.752 | 53.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.577 | 55.952 |
| Pitch | 53.791 | 54.003 |
| Root d3 | 51.943 | 52.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.577 | 55.952 |
| Pitch | 53.871 | 54.003 |
| Root d3 | 52.023 | 52.271 |
Cutting tap preparation
Pre-drill recommendation: 53 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 54.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.