M55 × 4 Metric Thread Dimensions
Nominal diameter 55 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 52.402 mm. Basic minor diameter: 50.67 mm. Basic major diameter: 55 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 52.402 | 52.602 |
| Minor | 50.67 | 51.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.06 | Not specified |
| Pitch | 52.462 | 52.712 |
| Minor | 50.73 | 51.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 52.402 | 52.652 |
| Minor | 50.67 | 51.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.06 | Not specified |
| Pitch | 52.462 | 52.777 |
| Minor | 50.73 | 51.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 52.402 | 52.717 |
| Minor | 50.67 | 51.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.06 | Not specified |
| Pitch | 52.462 | 52.862 |
| Minor | 50.73 | 51.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 52.402 | 52.802 |
| Minor | 50.67 | 51.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.06 | Not specified |
| Pitch | 52.462 | 52.962 |
| Minor | 50.73 | 51.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 52.402 | 52.902 |
| Minor | 50.67 | 51.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.465 | 54.94 |
| Pitch | 52.106 | 52.342 |
| Root d3 | 49.642 | 50.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.465 | 54.94 |
| Pitch | 52.192 | 52.342 |
| Root d3 | 49.728 | 50.033 |
Cutting tap preparation
Pre-drill recommendation: 51 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 53.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.