M55 × 1.5 Metric Thread Dimensions
Nominal diameter 55 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 54.026 mm. Basic minor diameter: 53.376 mm. Basic major diameter: 55 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 54.026 | 54.158 |
| Minor | 53.376 | 53.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.032 | Not specified |
| Pitch | 54.058 | 54.228 |
| Minor | 53.408 | 53.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 54.026 | 54.196 |
| Minor | 53.376 | 53.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.032 | Not specified |
| Pitch | 54.058 | 54.27 |
| Minor | 53.408 | 53.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 54.026 | 54.238 |
| Minor | 53.376 | 53.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.032 | Not specified |
| Pitch | 54.058 | 54.323 |
| Minor | 53.408 | 53.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 54.026 | 54.291 |
| Minor | 53.376 | 53.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.032 | Not specified |
| Pitch | 54.058 | 54.393 |
| Minor | 53.408 | 53.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 54.026 | 54.361 |
| Minor | 53.376 | 53.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.732 | 54.968 |
| Pitch | 53.834 | 53.994 |
| Root d3 | 52.91 | 53.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.732 | 54.968 |
| Pitch | 53.894 | 53.994 |
| Root d3 | 52.97 | 53.128 |
Cutting tap preparation
Pre-drill recommendation: 53.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 54.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.