M55 × 3 Metric Thread Dimensions
Nominal diameter 55 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 53.051 mm. Basic minor diameter: 51.752 mm. Basic major diameter: 55 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.051 | 53.231 |
| Minor | 51.752 | 52.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.048 | Not specified |
| Pitch | 53.099 | 53.323 |
| Minor | 51.8 | 52.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.051 | 53.275 |
| Minor | 51.752 | 52.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.048 | Not specified |
| Pitch | 53.099 | 53.379 |
| Minor | 51.8 | 52.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.051 | 53.331 |
| Minor | 51.752 | 52.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.048 | Not specified |
| Pitch | 53.099 | 53.454 |
| Minor | 51.8 | 52.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.051 | 53.406 |
| Minor | 51.752 | 52.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.048 | Not specified |
| Pitch | 53.099 | 53.549 |
| Minor | 51.8 | 52.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.051 | 53.501 |
| Minor | 51.752 | 52.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.577 | 54.952 |
| Pitch | 52.791 | 53.003 |
| Root d3 | 50.943 | 51.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.577 | 54.952 |
| Pitch | 52.871 | 53.003 |
| Root d3 | 51.023 | 51.271 |
Cutting tap preparation
Pre-drill recommendation: 52 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 53.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.