M55 × 2 Metric Thread Dimensions
Nominal diameter 55 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 53.701 mm. Basic minor diameter: 52.835 mm. Basic major diameter: 55 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.701 | 53.851 |
| Minor | 52.835 | 53.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.038 | Not specified |
| Pitch | 53.739 | 53.929 |
| Minor | 52.873 | 53.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.701 | 53.891 |
| Minor | 52.835 | 53.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.038 | Not specified |
| Pitch | 53.739 | 53.975 |
| Minor | 52.873 | 53.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.701 | 53.937 |
| Minor | 52.835 | 53.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.038 | Not specified |
| Pitch | 53.739 | 54.039 |
| Minor | 52.873 | 53.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.701 | 54.001 |
| Minor | 52.835 | 53.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55.038 | Not specified |
| Pitch | 53.739 | 54.114 |
| Minor | 52.873 | 53.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 55 | Not specified |
| Pitch | 53.701 | 54.076 |
| Minor | 52.835 | 53.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.682 | 54.962 |
| Pitch | 53.483 | 53.663 |
| Root d3 | 52.251 | 52.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 54.682 | 54.962 |
| Pitch | 53.551 | 53.663 |
| Root d3 | 52.319 | 52.508 |
Cutting tap preparation
Pre-drill recommendation: 53 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 54.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.