M48 × 5 Metric Thread Dimensions
Nominal diameter 48 mm; pitch 5 mm.
Basic geometry
Basic pitch diameter: 44.752 mm. Basic minor diameter: 42.587 mm. Basic major diameter: 48 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 44.752 | 44.964 |
| Minor | 42.587 | 43.037 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.071 | Not specified |
| Pitch | 44.823 | 45.088 |
| Minor | 42.658 | 43.218 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 44.752 | 45.017 |
| Minor | 42.587 | 43.147 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.071 | Not specified |
| Pitch | 44.823 | 45.158 |
| Minor | 42.658 | 43.368 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 44.752 | 45.087 |
| Minor | 42.587 | 43.297 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.071 | Not specified |
| Pitch | 44.823 | 45.248 |
| Minor | 42.658 | 43.558 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 44.752 | 45.177 |
| Minor | 42.587 | 43.487 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.071 | Not specified |
| Pitch | 44.823 | 45.353 |
| Minor | 42.658 | 43.778 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 44.752 | 45.282 |
| Minor | 42.587 | 43.707 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.399 | 47.929 |
| Pitch | 44.431 | 44.681 |
| Root d3 | 41.351 | 41.795 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.399 | 47.929 |
| Pitch | 44.521 | 44.681 |
| Root d3 | 41.441 | 41.795 |
Cutting tap preparation
Pre-drill recommendation: 43 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 45.8 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.