M48 × 3 Metric Thread Dimensions
Nominal diameter 48 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 46.051 mm. Basic minor diameter: 44.752 mm. Basic major diameter: 48 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.051 | 46.231 |
| Minor | 44.752 | 45.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.048 | Not specified |
| Pitch | 46.099 | 46.323 |
| Minor | 44.8 | 45.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.051 | 46.275 |
| Minor | 44.752 | 45.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.048 | Not specified |
| Pitch | 46.099 | 46.379 |
| Minor | 44.8 | 45.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.051 | 46.331 |
| Minor | 44.752 | 45.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.048 | Not specified |
| Pitch | 46.099 | 46.454 |
| Minor | 44.8 | 45.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.051 | 46.406 |
| Minor | 44.752 | 45.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.048 | Not specified |
| Pitch | 46.099 | 46.549 |
| Minor | 44.8 | 45.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.051 | 46.501 |
| Minor | 44.752 | 45.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.577 | 47.952 |
| Pitch | 45.791 | 46.003 |
| Root d3 | 43.943 | 44.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.577 | 47.952 |
| Pitch | 45.871 | 46.003 |
| Root d3 | 44.023 | 44.271 |
Cutting tap preparation
Pre-drill recommendation: 45 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 46.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.