M48 × 1.5 Metric Thread Dimensions
Nominal diameter 48 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 47.026 mm. Basic minor diameter: 46.376 mm. Basic major diameter: 48 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 47.026 | 47.158 |
| Minor | 46.376 | 46.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.032 | Not specified |
| Pitch | 47.058 | 47.228 |
| Minor | 46.408 | 46.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 47.026 | 47.196 |
| Minor | 46.376 | 46.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.032 | Not specified |
| Pitch | 47.058 | 47.27 |
| Minor | 46.408 | 46.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 47.026 | 47.238 |
| Minor | 46.376 | 46.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.032 | Not specified |
| Pitch | 47.058 | 47.323 |
| Minor | 46.408 | 46.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 47.026 | 47.291 |
| Minor | 46.376 | 46.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.032 | Not specified |
| Pitch | 47.058 | 47.393 |
| Minor | 46.408 | 46.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 47.026 | 47.361 |
| Minor | 46.376 | 46.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.732 | 47.968 |
| Pitch | 46.834 | 46.994 |
| Root d3 | 45.91 | 46.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.732 | 47.968 |
| Pitch | 46.894 | 46.994 |
| Root d3 | 45.97 | 46.128 |
Cutting tap preparation
Pre-drill recommendation: 46.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 47.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.