M48 × 2 Metric Thread Dimensions
Nominal diameter 48 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 46.701 mm. Basic minor diameter: 45.835 mm. Basic major diameter: 48 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.701 | 46.851 |
| Minor | 45.835 | 46.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.038 | Not specified |
| Pitch | 46.739 | 46.929 |
| Minor | 45.873 | 46.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.701 | 46.891 |
| Minor | 45.835 | 46.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.038 | Not specified |
| Pitch | 46.739 | 46.975 |
| Minor | 45.873 | 46.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.701 | 46.937 |
| Minor | 45.835 | 46.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.038 | Not specified |
| Pitch | 46.739 | 47.039 |
| Minor | 45.873 | 46.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.701 | 47.001 |
| Minor | 45.835 | 46.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48.038 | Not specified |
| Pitch | 46.739 | 47.114 |
| Minor | 45.873 | 46.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 48 | Not specified |
| Pitch | 46.701 | 47.076 |
| Minor | 45.835 | 46.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.682 | 47.962 |
| Pitch | 46.483 | 46.663 |
| Root d3 | 45.251 | 45.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 47.682 | 47.962 |
| Pitch | 46.551 | 46.663 |
| Root d3 | 45.319 | 45.508 |
Cutting tap preparation
Pre-drill recommendation: 46 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 47.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.