M42 × 4.5 Metric Thread Dimensions
Nominal diameter 42 mm; pitch 4.5 mm.
Basic geometry
Basic pitch diameter: 39.077 mm. Basic minor diameter: 37.129 mm. Basic major diameter: 42 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 39.077 | 39.277 |
| Minor | 37.129 | 37.554 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.063 | Not specified |
| Pitch | 39.14 | 39.39 |
| Minor | 37.192 | 37.722 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 39.077 | 39.327 |
| Minor | 37.129 | 37.659 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.063 | Not specified |
| Pitch | 39.14 | 39.455 |
| Minor | 37.192 | 37.862 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 39.077 | 39.392 |
| Minor | 37.129 | 37.799 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.063 | Not specified |
| Pitch | 39.14 | 39.54 |
| Minor | 37.192 | 38.042 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 39.077 | 39.477 |
| Minor | 37.129 | 37.979 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.063 | Not specified |
| Pitch | 39.14 | 39.64 |
| Minor | 37.192 | 38.252 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 39.077 | 39.577 |
| Minor | 37.129 | 38.189 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.437 | 41.937 |
| Pitch | 38.778 | 39.014 |
| Root d3 | 36.006 | 36.416 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.437 | 41.937 |
| Pitch | 38.864 | 39.014 |
| Root d3 | 36.092 | 36.416 |
Cutting tap preparation
Pre-drill recommendation: 37.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 40 mm. Approximate formation model. Estimated formation: 65.4%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.