M42 × 3 Metric Thread Dimensions
Nominal diameter 42 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 40.051 mm. Basic minor diameter: 38.752 mm. Basic major diameter: 42 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.051 | 40.221 |
| Minor | 38.752 | 39.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.048 | Not specified |
| Pitch | 40.099 | 40.311 |
| Minor | 38.8 | 39.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.051 | 40.263 |
| Minor | 38.752 | 39.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.048 | Not specified |
| Pitch | 40.099 | 40.364 |
| Minor | 38.8 | 39.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.051 | 40.316 |
| Minor | 38.752 | 39.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.048 | Not specified |
| Pitch | 40.099 | 40.434 |
| Minor | 38.8 | 39.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.051 | 40.386 |
| Minor | 38.752 | 39.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.048 | Not specified |
| Pitch | 40.099 | 40.524 |
| Minor | 38.8 | 39.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.051 | 40.476 |
| Minor | 38.752 | 39.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.577 | 41.952 |
| Pitch | 39.803 | 40.003 |
| Root d3 | 37.955 | 38.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.577 | 41.952 |
| Pitch | 39.878 | 40.003 |
| Root d3 | 38.03 | 38.271 |
Cutting tap preparation
Pre-drill recommendation: 39 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 40.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.